 INKS SPARE
PARTS PLATES,
TYPE
Inks EMMCORP offers a variety of inks. Depending on
your application and the material you are printing
on, we have ink that will fully satisfy you. The
inks EMMCORP offers are constantly improved and if
needed, adapted to your needs. Enabling adhesion
to various substrate materials such as metals, plastics
and coated finishes. This and our 203 years of combined
experience makes our inks one of the best, if not
THE best, in the market. The ink formulation is such
that an excellent opaqueness is achieved while using
a minimum of ink. Compared to other inks you have
less ink related problems and your printing process
will become more cost-effective using EMMCORP ink.
For your convenience, we offer our inks in tubes and
cartridges for clean and efficient use or in 1
kg tubs. Some inks are available in 32 standard colors
plus process and custom colors (PMS, Pantone etc.)
EMMCORP's inks can be used with pad, screen and offset printing
machines. UV drying ink UV drying inks will remain workable until exposed to UV light.
Then it cures instantly. We recommend this type of ink for high-speed
applications and for applications with many color changes. UV ink
should be used, if you do not want to clean-up the machine after
use. UV ink is the economic choice for these applications. On many substrates UV ink provides a better adhesion than conventional
inks. It is impervious to most chemicals and in many cases performs
equal to epoxy inks.
Thermosetting ink
Our Thermosetting inks will cure with a hot air blower in a couple
of seconds or when exposed to air over a period of time. This ink
does not dry as quickly as conventional air-drying inks and stays
fresh over a longer period when not in use. If you have continuous
ink feeding and can afford to clean the machine, this ink is your
economical choice. It is available in 32 standard colors or customized
shades. See our color chart .
Air drying ink
EMMCORP's air-drying inks are offered in
a large variety of colors, excellent coverage with low ink usage.
To cure this ink, exposure to air is sufficient. To be able to
use it over a longer period a retarder is available. This ink
is heat resistant to up to 250º F
(120º C)
Special inks
Some applications require inks to meet special standards (e.g. MIL) or unusual
abrasion resistance. For such cases, EMMCORP carries e.g. 1 and 2-part epoxy
inks to meet your needs. Please describe what you need, so we can help you
finding the adequate ink for your application.
Spare parts
Spare parts and rubber rollers come directly from
the manufacturer. In order to minimize possible machine
related downtimes, we have established partnership
links with the sub-suppliers. This guarantees the
quality and reliability of our spare parts. 203 years
of experience and customer's feedback, allow us to
constantly improve the quality of these parts, making
them last longer, reduce costs and downtime.
EMMCORP keeps standard "wear and tear" parts
in stock. Other parts are available with a minimum
of delay, due to our direct connection with the manufacturer,
in-house manufacturing capabilities and fast transportation.
Even in an emergency, parts are readily available. For Spare
parts and accessories for our B3 machines, incl. a mechanical
drawing click
here .
Plates, Type
EMMCORP offers a full range of cliches and individual type
to meet your needs. Our preferred choice for high production is
the water-washout polymer cliché (print plates), which can
last up to 2,000,000 million cycles. In combination with a numbering
head - for date and lot codes - the system offers high flexibility
and quick set-ups. For low volume, paired with high versatility,
the use of individual type (steel, brass, or lead) is recommended.
In accordance with our philosophy of customer dedication, we guarantee
fast deliveries.
Do-It-Yourself polymer plate equipment is
available.
back to top
|
